FIS A M 6 A4 stainless steel / threaded rod
| Laoühik: | |
| EAN: | |
| Bränd: | Fischer |
| Drill hole diameter in perforated brick masonry: | 12 mm |
| Drill hole diameter in solid brick masonry: | 8 mm |
| Thread: | M 6 mm |
The FIS A versatile rod anchor made of stainless steel.
The fischer threaded rod FIS A is made from stainless steel. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system of stainless steel threaded rods in combination with fischer injection mortars is suitable and approved for fixings outside and in damp rooms without aggressive conditions.
Top Features
- The universal solution for various fischer injection mortars. For a manageable range and simpler storage.
- Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars.
- Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs.
- Stainless steel for outdoor use.
Advantages
- The threaded rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications.
- The wide range of approved threaded rods FIS A from M6 to M30 allows for various applications.
- Please refer to the approvals of the injection mortar used.
Applications
- Approved anchorings with Injection mortars FIS V, FIS VL and FIS GREEN
- Anchorings without approval with Injection mortars FIS EM, FIS EB, FIS SB, FIS P and FIS P Plus
Building materials
- In connection with several fischer injection mortars the threaded rod FIS A is approved or suitable for different building materials.
You can find detailed information on building materials in the registration document.
Functioning
- The threaded rod FIS A is suitable for pre-positioned and push-through installation.
- FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base.