GKM 27 / Plasterboard fixing metal
Dokumendid
Load_table.pdf

GKM 27 / Plasterboard fixing metal

Laoühik: FSC-40434
EAN: 4006209404348
Bränd: Fischer
Anchor length: 31 mm
Min. thickness to first supporting layer: 35 mm
Max. fixture thickness: 27 mm
Screw: 4,5 x 50 mm

The self-tapping metal fixing for gypsum plasterboard and gypsum fibreboard

The fischer gypsum plasterboard fixing GKM 27 is made of metal. When in pre-positioned installation, the plug is screwed in either manually or with a cordless screwdriver so that it is flush to the surface in gypsum plasterboard. No pre-drilling is required with single planked gypsum plasterboard panels. With gypsum fibreboard and double-planked gypsum plasterboard panels pre-drilling should take place with a Ø 8 mm drill. The fischer GKM 12 is fully delivered with a chipboard screw with a countersunk head. It is therefore universally suitable for quickly and safely mounting lights, electrical installations, and interior accessories.

Top Features

  • No drilling is required in single planked gypsum plasterboard panels. This saves time.
  • High load capacity due to positive fit fixing.
  • Less space required behind the board due to a short fixing length.
  • Ideal for series installation.
  • Complete with screw 4.5 x 50 mm.

Advantages

  • Due to its material properties, the GKM can be used in gypsum plasterboard and gypsum fibreboard, and can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications.
  • The sharp, self-tapping thread enables a secure, positive fit fixing. This achieves a high load-bearing capacity.
  • The cross-drive recess means that a standard screwdriver or bit can be used. No special setting tool is required.
  • The short fixing length means that only a small amount of space is required behind the board. As a result, the GKM can also be used in the case of unknown board thickness and cavity depth.

Functioning

  • The GKM is suitable for pre-positioned installation.
  • The self-tapping metal fixing GKM taps itself into the plasterboard with a positive fit.
  • Flush installation in the board building material. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
  • Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
  • Pre-drill with a Ø 8 mm drill bit when using gypsum fibreboard and double-planked gypsum plasterboard.
  • Not suitable for tiled plasterboard.

Applications

  • Pictures
  • Lighting
  • Electrical installations
  • Fitting accessories

Building materials

  • Gypsum fibreboard
  • Gypsum plasterboard

You can find detailed information on building materials in the registration document.

Tarneaeg
Määratlemata
Hind
€0,70