SXRL-FUS A4 / Frame fixing, stainless steel, ø 10 mm

The versatile with multiple anchorage depth

The fischer frame fixing SXRL-FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder T30 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of metal constructions.

Top Features:

• ETA rating with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry.
• The long expansion element makes the SXRL versatile.
• Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials.
• Simple to assemble: Ribs prevent plug rotation during installation

Applications:

• Façade, ceiling and roof substructures made of wood and metalFacade substructures under compression load (e.g. distance installation without a wall bracket)
• Windows
• Gates and doors
• Wardrobes
• Kitchen hanging cabinets
• Squared timbers
• Beams
• TV consoles
• Wall covering
• Metal brackets
• Metal supports
• Cable ducts
• Cable trays

Building materials:

• Approved for:

• Vertically perforated brick

• Aerated concrete

• Hollow blocks made from lightweight concrete

• Perforated sand-lime brick

• Thermal insulation blocks

• Solid block made from lightweight and normal weight concrete

• Solid brick

• Solid sand-lime brick

• Concrete ≧ C12/15

• Also suitable for:

• Natural stone with dense structure

• Solid panel made from gypsum

Advantages:

• The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL a versatile applicable product.
• Through the special geometry of the plug, the loads are evenly distributed in the drill hole.
• When the plug is to be set below the plaster, the longer ribs prevent plug rotation during installation.
• The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors.
• SXRL 14 is approved for the application under compression load and is thus for example useable for facade substructures that are mounted at a distance without wall brackets.
• Complete range available with diameters of 8, 10 and 14 mm and usable lengths up to 290 mm.

Functioning:

• In hollow building materials, the two expansion zones ensure that the introduction of force is gentle on the substrate. The porous block fillets are not crushed by the second expansion zone and therefore serve to transmit the force
• In aircrete and solid building material, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into substrate.
• SXRL-T with countersunk head screw is recommended for the installation of timber constructions; in the case of metal constructions, use SXRL-FUS with a wide sleeve rim and a moulded washer on the screw, which also features an integrated hexagon socket.