FBN II GS / Анкерный болт, ⌀ 12 мм
Документы
DOP.pdf
ETA.pdf

FBN II GS / Анкерный болт, ⌀ 12 мм

Артикул:
EAN:
Бренд: Fischer
Диаметр высверленного отверстия : 12 мм
Width across nut: 19 мм

The cost-efficient fixing with large washer for flexible use in non-cracked concrete.

The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions.

Top Features:

  • The large washer increases the size of the supporting surface. For the fixing of timber constructions.
  • Pre-assembled washer saves time during installation.
  • The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
  • If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
  • Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.

Functioning:

  • The FBN II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
  • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
  • When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
  • The head embossing offers a simple control of the anchoring.
  • In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Advantages:

  • The larger washer included with the FBN II GS creates a large supporting surface and, as such, allows for use in wood construction.
  • The pre-fitted washer ensures a fast assembly.
  • The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
  • The anchor is also ideal for large fixture thicknesses.
  • The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
  • Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
  • The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.

Applications:

  • Anchor plates with slotted holes
  • Façade sub-structures with slotted holes
  • Timber constructions
  • Tension anchor
  • Anchoring of wooden beams

Building materials:

Approved for:

  • Concrete C20/25 to C50/60, non-cracked

Also suitable for:

  • Concrete C12/15
  • Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Длина якоря
Срок поставки
Не выделено
Цена
€1,78