FUR-SS A4/ Frame fixing, stainless steel

The lamella plug with gentle power transfer

The fischer frame fixing FUR-SS A4 consists of a fixing sleeve made of high-quality nylon and a hexagonal screw made of stainless steel. The FUR-SS is set in the time-saving through-type installation. When driving in the screw, the teeth expand in the solid building material and against the drill hole wall. In hollow building materials, the teeth expand through the solid part of the block and form an undercut in the cavity. The fischer frame fixing FUR is suitable for securely fixing squared timber and gates in all building materials in outdoor areas.

Top Features:

• It is particularly assembly-friendly even in narrower drill holes and wide attachments due to slimline plug geometry.
• ETA approval for multiple fixings in concrete and masonry.
• Secure fixing in all building materials: Lamella adapts to the surface.
• With hexagonal screw made from stainless steel for outside

Applications:

• Façade and roof substructures made of wood and metal
• Windows
• Squared timbers
• Gates and doors
• Claddings
• Interior fitting

Building materials:

• Approved for:

• Concrete ≧ C12/15

• Vertically perforated brick

• Perforated sand-lime brick

• Solid sand-lime brick

• Solid brick made from lightweight concrete

• Solid brick

• Also suitable for:

• Natural stone with dense structure

• Solid panel made from gypsum

• Hollow blocks made from lightweight concrete

• Three-layer composite exterior wall panels

• Lightweight aggregate concrete

Advantages:

• The operating principle with an anchorage depth of 70 mm and proven asymmetrical teeth, makes it an assembly-friendly anchor even in an unknown base material.
• The slim geometry guarantees a simple installation, even in cases involving thick wooden fixtures and narrow drill holes.
• Range available with diameters of 8 and 10 mm and usable lengths up to 160 mm

Functioning:

• The FUR is suitable for push-through installation.
• Screwing in the screw causes the individual teeth to expand. In solid materials, the teeth create even expansion forces. In hollow materials, the teeth expand through the solid part of the block and form an undercut in the cavity.
• With vertically perforated bricks, only use rotary drilling (no impact drilling).
• Countersunk head screws are recommended for the installation of timber constructions; in the case of metal constructions, use anchors with hexagon head screws and moulded washers.