PN / Termofix

The constructive ETICS hammerset fixing with GRP nail

The fischer termofix PN 8 is ideal for fixing pressure-resistant insulation for ETIC up to 180 mm thick such as polystyrene boards, mineral wool boards, wood shaving lightweight panels and PU panels in concrete, aerated concrete, solid and hollow building materials. The structural fixing comprises a white plug sleeve with attached disc and a plastic nail. The termofix PN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The nail, made from glass-fibre reinforced plastic (GFK), guarantees optimum holding forces and fixing without thermal bridges. Thanks to the flat plug disc, a cheap, thin reinforced plaster layer can be applied.

Advantages

• Optimised retention forces thanks to the glass fibre reinforced plastic nail (GRP).
• Small anchoring depth of 35 mm saves on drilling times.
• The fixing is free of thermal bridges thanks to the GRP nail.
• The compression zone in the shank allows the disc to be pulled into the insulation.
• The disc fits tight to the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
• Can be combined with the insulating discs DT 90, DT 110 and DT 140 for very soft insulating materials.
• For insulating material thicknesses up to 180 mm.

Functioning

• The fixing is set in push- through installation.
• Simple, fast setting by driving the GRP nail in using a hammer.
• Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.

Applications

• Attachment of ETICS insulating boards on concrete and masonry
• Flush-to-surface installation in ETICS insulating materials e.g. polystyrene

Building materials

• Concrete
• Building brick
• Solid sand-lime brick
• Vertically perforated brick
• Perforated sand-lime brick

You can find detailed information on building materials in the registration document.