GK S / Plasterboard fixing
Dokumendid
Load_table.pdf

GK S / Plasterboard fixing

Laoühik: FSC-52390
EAN: 4006209523902
Bränd: Fischer
Anchor length: 22 mm
Min. thickness to first supporting layer: 25 mm
Max. fixture thickness: 13 mm
Screw: 4,5 x 35 mm
Ajam: PZ 2

The fastest installation in gypsum plasterboard

The fischer gypsum plasterboard fixing GK S is made of high-quality nylon. When in pre-positioned installation, the plug is screwed in using the setting tool included with a cordless screwdriver so that it is flush to the surface in gypsum plasterboard. No preliminary drilling is necessary for board thicknesses up to 15 mm. fischer GK S is fully supplied with a chipboard screw. It is therefore suitable for quickly and safely mounting pictures, lights, and electrical installations.

Top Features

  • Simple and fast installation due to a setting tool.
  • High load capacity due to positive fit fixing.
  • Less space required behind the board due to a short fixing length.
  • Ideal for series installation.
  • Fully supplied with chipboard screw.

Advantages

  • The included setting tool combines the drilling and fixing setting functions. It thus allows for a fast and simple installation.
  • The sharp, self-tapping thread of the GK enables a secure, positive fit fixing. This achieves a high load-bearing capacity.
  • The short fixing length means that only a small amount of space is required behind the board. As a result, the GK can also be used in the case of unknown board thickness and cavity depth.
  • The cross-drive recess in the head of the fixing means that the GK can also be screwed out like a screw without a setting tool.
  • The GK can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications.

Functioning

  • The gypsum plasterboard fixing GK is suitable for pre-positioned installation.
  • The GK is screwed flush into the gypsum plasterboard using the setting tool provided. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
  • Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
  • For board thicknesses greater than 15 mm, drill a hole first by using the setting tool.
  • Not suitable for gypsum fibreboard and tiled plasterboard.

Applications

  • Pictures
  • Lighting
  • Electrical installations
  • Fitting accessories
  • Series installations

Building materials

  • Gypsum plasterboard, single and double-planked

You can find detailed information on building materials in the registration document.

Tarneaeg
Määratlemata
Hind
€0,28