Dokumentai
Load_table.pdf |
GK S / Plasterboard fixing
SKU: | FSC-52390 |
EAN: | 4006209523902 |
Prekės ženklas: | Fischer |
Anchor length: | 22 mm |
Min. thickness to first supporting layer: | 25 mm |
Max. fixture thickness: | 13 mm |
Screw: | 4,5 x 35 mm |
Pavara: | PZ 2 |
The fastest installation in gypsum plasterboard
The fischer gypsum plasterboard fixing GK S is made of high-quality nylon. When in pre-positioned installation, the plug is screwed in using the setting tool included with a cordless screwdriver so that it is flush to the surface in gypsum plasterboard. No preliminary drilling is necessary for board thicknesses up to 15 mm. fischer GK S is fully supplied with a chipboard screw. It is therefore suitable for quickly and safely mounting pictures, lights, and electrical installations.
Top Features
- Simple and fast installation due to a setting tool.
- High load capacity due to positive fit fixing.
- Less space required behind the board due to a short fixing length.
- Ideal for series installation.
- Fully supplied with chipboard screw.
Advantages
- The included setting tool combines the drilling and fixing setting functions. It thus allows for a fast and simple installation.
- The sharp, self-tapping thread of the GK enables a secure, positive fit fixing. This achieves a high load-bearing capacity.
- The short fixing length means that only a small amount of space is required behind the board. As a result, the GK can also be used in the case of unknown board thickness and cavity depth.
- The cross-drive recess in the head of the fixing means that the GK can also be screwed out like a screw without a setting tool.
- The GK can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications.
Functioning
- The gypsum plasterboard fixing GK is suitable for pre-positioned installation.
- The GK is screwed flush into the gypsum plasterboard using the setting tool provided. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
- Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
- For board thicknesses greater than 15 mm, drill a hole first by using the setting tool.
- Not suitable for gypsum fibreboard and tiled plasterboard.
Applications
- Pictures
- Lighting
- Electrical installations
- Fitting accessories
- Series installations
Building materials
- Gypsum plasterboard, single and double-planked
You can find detailed information on building materials in the registration document.