FPF ST / Chipboard screw Power-Fast CSK head, TX, blue zinc-plated, partial thread 3,5 mm

The premium chipboard screw with a quick bite for lightweight installation

Top Features:

• Precise, splinter-proof surface finish without the screw twisting off, even with fastenings close to the edge.
• Premium quality.
• High safety due to ETA approval.
• Faster bite due to unique Power-Fast thread. This extends up to the screw tip.
• Saves power and battery capacity. Shank ribs reduce the drive-in resistance.

The fischer Power-Fast FPF-ST YZP is a zinc-plated, blue passivated screw with partial thread and star TX recess. The countersunk head allows for surface flush installation in wood. The version with a partial thread enables the timber elements to be fastened together tightly. The screw is suitable for fixing load-bearing components in coated wood, hardwood, softwood, and timber connections. This is the case for plankings and with door and metal fixings.

Building materials:

• Glued-laminated timber
• Cross-laminated timber
• Laminated veneer plywood panels (e.g. Multiplex)
• Hard woods (pre-drilled)
• Chipboards and oriented strand boards (e.g. OSB panels)
• Plywood
• Solid wood panels
• Soft woods
• And many other wood materials

Advantages/benefits:

• The unique Power-Fast thread reaches into the screw tip and ensures a fast bite. This makes your work noticeably easier with all wood materials.
• The shank ribs (for screws with partial thread from 50 mm in length and up) substantially reduce drive-in resistance and thus enable greater power and battery conservation in your work.
• The optimised head geometry enables an exact and splinter-free surface finish without the screw twisting off, even with connections close to the edge.
• The ETA approval guarantees the high safety standard and the premium quality of fischer Power-Fast screws.

Functioning:

• Screws with partial threads can lock wood parts into place by tightening them against each other.
• Full-thread screws are recommended for mounting thin parts and in less firm wood materials (e.g. soft woods).
• Screws with countersunk head can be flush mounted with the wood.
• Pan-Head screws are particularly well suited for metal and wood joints.
• The raised countersunk head is particularly suitable for joints where the screw head is visible and needs to leave behind an attractive appearance.