TOX styrene-free vinyl ester composite mortar Liquix Pro 1 - one for all: building authority approval for cracked & non-cracked concrete, perforated and solid brick and subsequent reinforcement connections

• LEED and emission-tested: for ecological and healthy living
• Commercial threaded rods can be used
• Earthquake tested C1
• Can even be processed at extremely low temperatures (down to -10 °C)
• Can be used in wet and water-filled boreholes
• Low centre and edge distances due to expansion pressure-free anchoring
• Fastening of heavy loads weighing up to 13,3 tons
• Can also be used overhead
• Reuse of the opened cartridge by changing the static mixer

Processing and assembly:

• Work with a perforated sleeve in perforated stone
• Clean the drill hole
• Screw the static mixer firmly onto the cartridge
• Mark the setting depth on the anchor rod that deviates from the standard
• Discard the first approx. 10 cm of the composite mortar and do not use it for fastening
• Fill approx. 2/3 of the cleaned drill hole from the bottom of the drill hole or, if using a sieve sleeve, fill it completely with composite mortar
• Insert the anchor rod with slight rotational movements to the specified setting depth
• Observe the torques and curing times specified in the applicable approvals
• The mortar may be used in dry or damp concrete and in water-filled drill holes