FAZ II K GS / Bolt anchor, ⌀ 12 mm

SKU:
EAN:
Zīmols:	Fischer
Diametrs:	12 mm

The compact bolt anchor with a large washer to meet the highest requirements. Short and practical.

The fischer bolt anchor FAZ II K GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the low anchorage depth and simple mounting, the FAZ II K GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties.

Top Features:

• Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation.
• The lower setting depth saves time and power when drilling and hammering.
• Expansion clip provides maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.

Advantages:

• The FAZ II GS with 8, 10 and 12 mm diameters are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort.
• The significantly larger outer diameter of the washers for FAZ II 16 GS ensures a larger supporting surface, and as such allows for use in wood construction.
• The pre-fitted washer ensures a fast installation.
• Furthermore, the FAZ II GS bolt anchor offers all of the benefits of the FAZ II.

Applications:

• Anchor plates with slotted holes
• Façade sub-structures with slotted holes
• Timber constructions
• Tension anchor
• Anchoring of wooden beams

Functioning:

• The FAZ II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
• The head embossing offers a simple control of the anchoring.
• In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Building materials:

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

You can find detailed information on building materials in the registration document.