Hammer-in facade fixing 60mm long expansion zone for high performance in masonry, as well as lightweight and aerated concrete. Used for fixation of polystyrene (EPS) boards, mineral wool, light wood wool building boards, polyurethane (PU) boards and lightweight recycled panels.

Material:

• plug sleeve: impact resistant copolymer of polypropylene PP
• nail pin: electro zinc plated pin
• head coating: polyamide PA 6.0 (Nylon) reinforced with fiberglass

Advantages-application:

• easy installation with the best performance in lightweight base materials
• approved for use in base material categories B, C, D, and E
• steel nail allows fast and trouble-free installation with correct expansion of the plug
• reduction of thermal bridge formation (value 0.003W/K) through the integration of an impact-resistant plastic over molding on the nail head
• plate stiffness (value 0.5 kN/mm) ensures smooth elevation surface and stable insulation system

Approved for:

• solid Brick (Use category B)
• hollow brick (Use category C)
• vertically-perforated clay block (Use category C)
• lightweight concrete block (Use category C)
• reinforced components of lightweight aggregate concrete (Use category D)
• aerated concrete block (Use category E)

Applications:

• External Thermal Insulation Composite Systems (ETICS);
• Polystyrene (EPS) boards;
• Mineral wool;
• Polyurethane (PU) boards;
• Lightweight recycled panels.

Installation tips:

• drill a hole of required diameter and depth
• lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
• hammer the steel nail into the plastic sleeve until fixing is secure and flush with insulation material
• embedment depth of min 60mm in approved materials
• drilling depth of min 80mm in approved materials
• can be used with additional KWL insulation holding plates: KWL-90, KWL-110, and KWL-140, especially when is used soft insulation panels.
• temperature range when installed -35°C to +80°C