SKU:
EAN:
Brand:	Rawlplug
Effect. anchoring depth (Subst. A,B,C,D):	25 mm
Effect. anchoring depth (Subst. E):	65 mm
Min. drill hole depth (Subst. A,B,C,D):	40 mm
Min. drill hole depth (Subst. E):	80 mm
Diameter:	8 mm
Disk diameter:	60 mm
Point thermal transmittance [W/K]:	0.002
TORX:	40T
Building material classes:	A, B, C, D, E
Accessories:	Tool for installation TFIX-8S

Versatile screw-in facade fixing with high performance in all base materials recommended for ETICS. Used for fixation of polystyrene (EPS) boards, mineral wool, light wood wool building boards, polyurethane (PU) boards and cork boards.

Advantages-application:

• quick and easy installation in all substrates (categories A, B, C, D, E)
• unique sleeve compression zone for precision installations
• the long plastic over molding on the TFIX-8S screw minimizes thermal bridging (value 0.002W/K), contributing to energy-saving benefits
• the shortest embedment depth at the maximum strength parameters
• unique design allows for high load-bearing capacities. This reduces the quantity of fixings required per square meter of insulation
• plate stiffness (value 0.6 kN/mm) ensures smooth elevation surface and stable insulation system
• pre-assembled screw saves time and labor

Approved for:

• concrete C12/15-C50/60 (Use category A)
• solid brick (Use category B)
• solid sand-lime brick (Use category B)
• hollow sand-lime brick (Use category C)
• hollow brick (Use category C)
• hollow lightweight concrete block (Use category C)
• vertically-perforated clay block (Use category C)
• lightweight concrete block (Use category C)
• reinforced components of lightweight aggregate concrete (Use category D)
• aerated concrete block (Use category E)

Applications:

• Polystyrene (EPS) boards;
• Mineral wool;
• Light wood wool building boards;
• Polyurethane (PU) boards;
• Cork boards.

Installation tips:

• drill a hole of required diameter and depth
• lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
• tighten screw (ideally using a special TFIX-8S-TOOL setting tool - can be found in the accessories section) until fixing is secure and flush with insulation material.
• embedment depth of min 25mm in A, B, C, D materials and 65mm in Aerated Concrete Block
• drilling depth of min 40mm in A, B, C, D materials and 80mm in Aerated Concrete Block
• in soft insulation panels the fixing should be combined with insulation retaining plates

Accessories: Tool for installation TFIX-8S