Documents
| Technical data sheet |
| Tehniskā datu lapa |
| DOP |
| ETA |
TERMOZ CN 8 / hammerset fixing
| SKU: | |
| EAN: | |
| Brand: | Fischer |
| Drill diameter: | 8 mm |
| Disk diameter: | 60 mm |
| Minimal drill hole depth: | 45 mm |
| Embedment depth (A,B,C,D): | 35 mm |
| Embedment depth (E): | 55 mm |
| Point thermal transmittance [W/K]: | 0.000-0.001 |
| Building material classes: | A, B, C, D, E |
Hammer-set fixing for the installation of ETICS-systems in all standard masonry materials. Simple, fast setting by driving the compound nail in using a standard hammer.
Advantages:
- To set with few hammer blows.
- The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
- High retention forces thanks to the steel tip of the compound nail.
- Due to the component nail, the TERMOZ CN 8 provides nearly no thermal bridging and helps saving energy
- can be combined with insulation discs DT 90, 110 and 140 mm for very soft insulation materials.
Approved for:
- Building material classes A, B, C, D, E
- Concrete
- Full blocks made from concrete
- Building brick
- Solid sand-lime brick
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Lightweight aggregate concrete
- Aerated concrete
Installation tips:
- quick and easy installation per hammering in the compound nail with a hammer;
- minimal embedment depth 35 mm (A,B,C,D) and 55 mm (E) in the substrate is needed;
- non-bearing layers such as adhesives and old render are to be included in the required useful length.
