SKU:
EAN:
Brand:	Rawlplug
Disc diameter:	60 mm
Diameter:	10 mm
Min. drill hole depth (Subst. A,B,C):	35 mm
Min. drill hole depth (Subst. D):	50 mm
Min. drill hole depth (Subst. E):	70 mm
Effect. anchoring depth (Subst. A,B,C):	25 mm
Effect. anchoring depth (Subst. D):	40 mm
Effect. anchoring depth (Subst. E):	60 mm

Hammer set insulation fixing with reinforced plastic nail. Used for fixing of polystyrene boards, mineral wool, light wood wool building boards, polyurethane boards, wood fiber boards and lightweight recycled panels.

Material:

• plug sleeve: impact resistant copolymer of polypropylene PP
• nail pin: polyamide PA 6.0 (Nylon) reinforced with fiberglass

Advantages:

• installation in all substrates (categories A,B,C, D, E)
• the plastic nail reduces heat transmission (value 0.3W/K)
• point thermal transmittance: 0.003 - 0.006 W/K
• plastic nail reinforced with glass fiber allows fast and trouble-free installation with correct expansion of the plug
• expansion zone designed for low embedment depths, reducing the amount of drilling required
• plate stiffness (value 0.4 kN/mm) ensures smooth elevation surface and stable insulation system

Approved for:

• concrete C12/15-C50/60 (Use category A)
• solid bricks (Use category B)
• solid sand-lime brick (Use category B)
• hollow sand-lime brick (Use category C)
• hollow lightweight concrete block (Use category C)
• vertically-perforated clay block (Use category C)
• lightweight concrete block (Use category C)
• reinforced components of lightweight aggregate concrete (Use category D)
• aerated concrete block (Use category E)

Application:

• External Thermal Insulation Composite Systems (ETICS);
• Polystyrene (EPS) boards;
• Mineral wool;
• Light wood wool building boards;
• Polyurethane (PU) boards;
• Wood fibre boards;
• Lightweight recycled panels

Installation tips:

• drill a hole of required diameter and depth
• lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached
• lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material.
• embedment depth of min 25 in masonry, 40mm in perforated materials and 60mm in lightweight concrete block and aerated concrete
• drilling depth of min 35 in masonry, 50mm in perforated materials and 70mm in lightweight concrete block and aerated concrete