TERMOZ PN 8 / Hammerset fixing

SKU:
EAN:
Brand: Fischer
Drill diameter: 8 mm
Disk diameter: 60 mm
Minimal drill hole depth: 45 mm
Embedment depth: 35 mm
Bulding material classes: A, B, C
Point thermal transmittance (W/K): 0.000

Hammer-set fixing for the mounting of ETICS-systems with polystyrene board or insulation boards in concrete and masonry. Per hammering in the pre-assembled plastic nail with a hammer the fastener will be fixed in the substrate.

Advantages-application:

  • due to the special architecture of the fixing, small drill hole depths are possible;
  • the crumple zone allows an exact washer penetration;
  • the asymmetric expansion element ensures a perfect anchoring even in hollow and problem substrates;
  • the innovative shank and the special geometry of the nylon nail minimizes the failure tendency significant, particularly in full substrates;
  • the washer thickness of only 2.5 mm allows thin and economic reinforcement layers.

Approved for:

  • concrete
  • solid sand lime bricks
  • clay bricks
  • solid concrete block
  • vertically performed sand-lime blocks
  • vertically performed clay bricks

Applications:

  • Thermal insulation boards in an external ETIC-system

Installation tips:

  • quick and easy installation per hammering in the compound nail with a hammer;
  • embedment depth of minimal 35 mm in the substrate is needed;
  • non-load bearing layers such as adhesives and old render are to be included in the required useful length.
Fixing length, Insulation thickness
Delivery Time
On stock
Price
€0.172